PC100-2 PROCESS CONTROLLER
Sun Systems Model PC100-2 process controller is a dual sensor input, single channel control, 1/4
DIN, digital process controller with a host of advanced features. The unit was designed to be easy to use while
still providing all the features most users will ever need. The PC100-2 adds to the standard
PC100 a second, electrically isolated, sensor input channel
and advanced control routines that allow you to select which
sensor, or sensor combination, will be used for control. Both
sensors are displayed and can be read from the remote
interfaces.
The PC100-2 consists of the controller and two flat cable
connected assemblies. The IEEE-488, RS232, and
RS422/RS485 interface connectors are provided on a
small assembly to allow for mounting at an easily
accessible location in your equipment. The Process I/O
board provides for the line input power connection and
outputs to control your high power process circuits. All
the line voltage related connections are located on the
process I/O board allowing only low voltage flat cable
connections to the controller.
|